Monkey Business

For this tutorial you will need the following:

Paint Shop Pro: Any version should work fine. I'm using PSP X.

Scrap kit of your choice. I am using a PTU kit from Juicy Bits called Little Monkey.

I am not using a tube in this tut other than the little monkey that came with the scrapkit.

Plugins: Visman Natural: Ripper, Eye Candy 4000 Shadow Lab

Remember that the tubes and elements I use in this tut are only a suggestion. Feel free to use other elements or make yours just like mine, either way, it's completely up to you. Make it yours!

Let's get started.

Open a new 700x250 transparent image.

Open paper 13, copy and paste as a new layer, crop down to fit 700x250 size. Adjust, blur, radial blur with the settings as follows:

Zoom, strength 100, Eliptical checked, all other settings at 0.

Duplicate and hide the top layer. On the bottom layer apply Ripper plugin with the following settings:

Size 78

Width 72

Height 135

Angle 193

Depth 164

Distortion 139

Drop the opacity around 25 or 30.

Unhide the top layer and change the opacity to Hard Light.

Copy your tube and arrange in the middle. Add a drop shadow using Eye Candy 4000 Shadow Lab, using the following settings:

Direction 315

Center offset 5

Overall Opacity 100

Overall Blur 56

Perspective Blur 0

Black

Draw only outside selection checked.

Open the little green square element (EI10) copy and paste as a new layer, rotate to the left by 12.

Open element (EI26) copy and paste as a new layer, rotate to the left by 90. Drag below the little green square and arrange however you like it. Duplicate, image mirror and arrange on the right side however you like it.

Add a new raster layer at the top. Selections, select all, modify, contract by 5. Open a paper of your choice, I used 8. Copy and paste as a new layer, click delete on your keyboard and deselect. Add drop shadow 2, 2, 50, 5 black, then do the same over again but change it to -2, -2, 50, 5.

Add your text and credits and you're all done!

No Tears in Heaven

For this tutorial you will need the following:

Paint Shop Pro, I am using PSP X, you should be able to use any version.

Tube of choice, I am using the artwork of Ismael Rac which you need a license to use. You can get at his site HERE.

Scrap kit of choice. I am using Angels Above by Wicked Princess Scraps. It's free for the first week out, then after that it will become PTU. You can find it on her blog HERE. If it is no longer a freebie when you go to her blog post, her stores she sells at are listed at the top left side.

Font of choice, I am using Playbill

Plugins: No outside plugins needed

Just remember that my choices of papers and elements is just a suggestion, change it up and make it yours! You don't have to follow mine exactly.

Let's get started!

Open a new 700x700 canvas with a white background. You can crop it at the end, resize and get rid of the white if you want. This just gives us lots of room to work.

Open WP_AA_Frame, copy and paste as a new layer, resize by 75%. Click inside it with your magic wand, hold down your shift key and get the areas inside the frames that are rotated. Selections>modify>expand by 5.

Open paper 5, copy and paste as a new layer, resize by 75%, selections>invert, click delete on your keyboard. Leave selected.

Open your tube, copy and paste as a new layer, arrange it how you want inside your frame, then take your eraser tool and erase whatever parts you don't want showing over the frame. Deselect and add a drop shadow to your tube and frame.

Open the scalloped frame, copy and paste as a new layer. Drag it down so it is just above your white background layer. Add your drop shadow.

Open the rainbow element, copy and paste as a new layer. Drag it down below the green frame, and above the background paper. Arrange it how you like it. I just pretty much left mine where it pasted because you can see it just behind her.

Open the pansy element, copy and paste as a new layer, resize by 55%, mirror, rotate to the right by 10, add a drop shadow.

Open HRHeartscatter, copy and paste as a new layer, drag this layer so that it is just above the white background layer. Resize by 85%.

Open the harp element, copy and paste as a new layer, resize by 25%, rotate to the left by 15. Add your drop shadow and arrange it on the left side of your tag.

Add any text to it you'd like and your name, copyright info and credits as needed. Crop, resize and save.

Rockabilly

For this tutorial you will need the following:

Paint Shop Pro, I am using PSP X, you should be able to use any version.

Tube of choice, I am using the artwork of Jose Cano which you need a license to use. You can get HERE.

Scrap kit of choice. I am using Rockabilly by Juicy Bits, which you can purchase at her store HERE.

Font of choice, I am using Pristina

Mask of your choice

Plugins: Eye Candy 4000 Gradient Glow for name, optional

Just remember that my choices of papers and elements is just a suggestion, change it up and make it yours! You don't have to follow mine exactly.

Let's get started!

Open a new canvas 650x650 white background.

Open element 28, copy and paste as a new layer. Click inside it with your magic wand, selections> modify>expand by 3. Open a paper of your choice (I used 9), copy and paste as a new layer. If you used the same one as I did, resize by about 75%, if you use another one, resize as needed. Selections>invert> on your paper layer, click delete on your keyboard. drag it below your frame, keep selected.

Open your close up tube, copy and paste as a new layer, drag it below your frame, arrange how you want it, click delete on your keyboard and deselect. Duplicate the tube, on the top layer, adjust gaussian blur by 3, change the opacity to soft light. On the bottom layer, change the hue and saturation to 0 on each.

Add a drop shadow to your frame. Hide your white background layer and merge visible, then unhide your background. Resize the merged layer by 75%.

Open element 24, copy and paste as a new layer, resize by 70%, click inside the square part with your magic wand, expand by 3, invert. Open a paper of your choice, copy and paste as a new layer, click delete on your keyboard, drag it below the frame, leave selected.

Open your tube, copy and paste as a new layer, use your eraser tool to erase the parts that hang over. Deselect and add a drop shadow to your tube.

Bring the circle frame layer up above the frame layer you just were working with and arrange it near the bottom right.

Add any embellishments that you want to your tag.

Open a paper, copy and paste as a new layer, send it to the bottom, just above the white background layer. Open your mask, go to layers>new mask layer>from image, find it in the drop down box and click ok. Delete the mask layer in your layer palette, and then merge group.

Add your name, copyright info, crop your tag if necessary, resize and you're done!

Lovely Mermaid

For this tutorial you will need the following:

Paint Shop Pro, I am using PSP X, you should be able to use any version.

Tube of choice, I am using the artwork of Ismael Rac which you need a license to use. You can get at his store HERE.

Scrap kit of choice. I am using Deliriously Delilia by Wicked Princess Scraps

Font of choice, I am using A&S Black Swan

Just remember that my choices of papers and elements is just a suggestion, change it up and make it yours! You don't have to follow mine exactly.

Let's get started!

Open a new white canvas about 600x600

Open twig frame 2, copy and paste as a new layer, resize by 60%.

Click inside with your magic wand, selections, modify, expand by 5.

Add a new raster layer below the twig frame, flood fill with white. Keep selected.

Open the bridge element, copy and paste as a new layer, Resize by 60%, arrange it where you want it, selections invert, click delete on your keyboard. Merge it down to your white layer you just filled.

Open your tube, copy and paste as a new layer, resize. If you are using the same one I did, resize by around 60%. Add a drop shadow, mirror and arrange on the right side.

Open the whirlpool element, copy and paste as a new layer, resize by 40%, drag below the bridge background layer.

Open butterfly spray, copy and paste, drag just below the bridge background layer. I also erased the small butterfly at the very top left because it was too far out beyond the rest of the tag.

Open the curved cattail element, copy and paste as a new layer. Resize by 70%, arrange on the left side, duplicate and resize that one by 70%, duplicate that one, mirror it, and then arrange the three however you like on the left side. Merge the 3 together and add a drop shadow.

Open the conch shells, copy and paste as a new layer, resize by 35%, erase the one on the right. Mirror and arrange over the bottom of the cattails. Add drop shadow.

Open rose gems element, copy and paste as a new layer, resize by 45%, arrange them below your tube, and above the frame. Take your eraser tool and erase any parts that stick out beyond the tube.

Add your name, copyright info, scrapkit credits if necessary by TOU, crop and resize if necessary and you're done!